One Canada Square
The tallest building in Canary Wharf and the easiest landmark to navigate by. We use it to orient ourselves when heading to jobs in the central estate and the surrounding high-rise blocks.
Spray foam removal in Canary Wharf is what we do every week, from South Quay penthouses to warehouse units near West India Quay. If your mortgage lender has flagged spray foam, or your loft is trapping condensation, we take it out cleanly and dispose of it properly. We work across E14 and Greater London, with same day spray foam removal available when a survey is looming.
Every job in Canary Wharf is a bit different, so we offer the full range of spray foam removal services rather than a single one-size approach. If you have been searching for Spray foam removal near me Canary Wharf, you are in the right place. We handle lofts, roofs, cavity walls, warehouses and full insulation removal, and we can usually get someone out to assess the job within 24 hours.
Spray Foam Removal near meWe cover every part of Canary Wharf, from One Canada Square apartments to terraces in Cubitt Town. If you need spray foam removal near you, we will assess the loft or roof void, confirm what type of foam you have, and give you a fixed price before we start. Most E14 jobs are booked within a few days of the first call.View details →
same day Spray Foam RemovalSame day spray foam removal is available across Canary Wharf when a survey or valuation is booked at short notice. We keep a van stocked with dry ice pellets and extraction gear for E14 postcodes. Call before midday and we can often have a technician at your property the same afternoon, particularly around Poplar and Blackwall.View details →
24/7 Spray Foam RemovalOur phone line is answered 24/7 for Canary Wharf customers. If you have a leak into a roof void, a collapsed section of foam, or an urgent lender deadline, we can arrange an emergency visit. Overnight and weekend callouts are common around South Quay and West India Quay, where building access is easier outside office hours.View details →
Residential Spray Foam RemovalMost of our Canary Wharf work is residential: lofts in Isle of Dogs terraces, roof voids in Millwall conversions, and apartment ceilings around Cabot Square. We use protective sheeting and HEPA-filtered vacuums to keep dust out of living spaces, and we remove the waste in sealed disposal bags the same day.View details →
Commercial Spray Foam RemovalWe handle commercial spray foam removal for offices, retail units and warehouses across Canary Wharf. Jobs are scheduled around your trading hours, with out-of-hours work available for units near Crossrail Place. We provide method statements, risk assessments and waste transfer notes for facilities managers who need them.View details →
loft spray foam removalLoft spray foam removal is our most common Canary Wharf job. Many E14 lofts have open cell spray foam sprayed directly onto the roof felt, which blocks ventilation and traps condensation. We cut it back, clear the rafters, and leave the loft ready for a surveyor or a new insulation system. Most lofts take one to two days.View details →
roof spray foam removalRoof spray foam removal in Canary Wharf often means working at height on flat or low-pitch roofs. We use reciprocating saws and oscillating multi-tools to cut foam away from rafters without damaging the timber, then vacuum the debris. Access is arranged with building management for high-rise blocks around South Quay and Blackwall.View details →
Attic spray foam removalAttic spray foam removal covers the same ground as loft work but often in older properties with tighter access. In Canary Wharf, that usually means converted dock buildings in Millwall and Cubitt Town. We use compact extraction equipment and respirators to work safely in confined spaces, and we photograph every stage for your records.View details →
spray foam insulation removalFull spray foam insulation removal is what lenders and surveyors usually ask for. We strip out polyurethane foam, adhesive residue and any contaminated insulation, then confirm the roof void is clear. Across Canary Wharf we complete most full removals in two to four days depending on the size of the property.View details →
open cell spray foam removalOpen cell spray foam is softer and easier to remove than closed cell, but it still traps moisture if it is sprayed over roof felt. We remove it with dry ice blasting machines where the substrate is delicate, and with mechanical tools where the foam is thicker. Common in Canary Wharf lofts and attic conversions.View details →
closed cell spray foam removalClosed cell spray foam is dense and bonded hard to timber, so it needs more force to remove. We use reciprocating saws and oscillating multi-tools to cut it back without splitting rafters. In Canary Wharf, closed cell foam is most often found in newer loft conversions around Poplar and Blackwall.View details →
mortgage lender spray foam removalMortgage rejection due to spray foam is one of the most common reasons people call us in Canary Wharf. Lenders want the foam gone and the roof void clear before they will release funds. We provide photographic evidence, a removal certificate and waste transfer notes that satisfy most major lenders and their surveyors.View details →
insulation removal serviceOur insulation removal service covers spray foam, old mineral wool and contaminated insulation in one visit. For Canary Wharf properties, we usually combine this with a roof void inspection to check for hidden damp and rot. Everything is bagged, labelled and disposed of at a licensed facility.View details →
insulation assessmentAn insulation assessment tells you exactly what you are dealing with before you commit to removal. We use thermal imaging cameras to map foam coverage, check for roof ventilation issues and look for signs of condensation. For Canary Wharf customers, the assessment report is often enough to satisfy a lender or surveyor.View details →
dry ice blasting spray foam removalDry ice blasting is our preferred method for delicate substrates. It removes spray foam without scratching timber or damaging roof membranes, and it leaves no secondary media to clean up. We use it across Canary Wharf on older rafters in Millwall and Cubitt Town where mechanical tools would be too aggressive.View details →
Cavity wall spray foam removalCavity wall spray foam removal is a bigger job than loft work and often needs a specialist approach. In Canary Wharf, cavity foam is most common in older terraces around Limehouse and Poplar. We remove it section by section, check the cavity for damp, and clear the wall ties before making good.View details →
sand blasting spray foam insulation removalSand blasting spray foam insulation removal is used on hard surfaces like brick and concrete where foam has bonded tightly. It is effective but messy, so we build negative air machines and protective sheeting into every job. In Canary Wharf this method suits warehouse walls and commercial units near West India Quay.View details →
thermal spray foam removalThermal spray foam removal uses heat to soften the foam before extraction, which reduces the risk of pulling timber fibres away with it. We use this method on sensitive roof structures in Canary Wharf, particularly in listed or older buildings around the Museum of London Docklands area.View details →
environmentally friendly insulation removalWe remove insulation with as little waste as possible. Foam is bagged and sent to licensed disposal, dry ice pellets sublimate back into the atmosphere, and we use HEPA filters to keep dust out of the air. For Canary Wharf customers who care about the environmental side, we can talk you through the whole process.View details →
Warehouse spray Foam removalWarehouse spray foam removal in Canary Wharf usually involves large ceiling areas and high-level access equipment. We work around your operations, often at night or over weekends, and use industrial vacuums and air scrubbers to keep the space usable. Most warehouse jobs around Blackwall and Millwall take three to five days.View details →
Every Canary Wharf job starts with access. High-rise blocks around South Quay and Cabot Square need lift bookings and sometimes a permit to work, so we sort that before we arrive. Once on site, we lay protective sheeting
Older conversions around Millwall and Cubitt Town often have hatches under 600mm, which limits the size of extraction equipment we can get into the roof void. It slows the job down and means more manual handling.
How we help: We carry compact dry ice blasting units and flexible hoses that fit through small hatches. Foam is broken down in stages and bagged in the loft before being passed down, which keeps the rest of your property clean.
Blocks around One Canada Square and Crossrail Place require advance notice for service lifts and sometimes restrict working hours. Without planning, a one-day job can stretch into three.
How we help: We confirm access requirements when we quote, book lifts in advance, and schedule noisy work inside permitted hours. Our technicians are used to working in managed buildings and carry the documentation concierges ask for.
Modern Canary Wharf lofts are often built with sealed roof voids, so spray foam traps condensation against the timber. That leads to hidden damp and rot, which is exactly what surveyors flag.
How we help: We remove the foam, inspect the rafters for rot, and check that ventilation paths are clear. Where needed, we recommend ventilation improvements so the problem does not come back after the foam is gone.
Mortgage lender or surveyor flags the foam
Condensation or damp on roof timbers
Musty smell in the loft or top floor
Foam is cracking or pulling away
Difficulty getting a survey or valuation
Canary Wharf is easy to find but tricky to park in, so we plan routes around the landmarks rather than the postcode. One Canada Square is our main orientation point for the estate, and we use Cabot Square and West India Quay to work out which side of the docks we need. For jobs near the Museum of London Docklands we usually approach from the Limehouse side, and for South Quay we come in via the Isle of Dogs. Crossrail Place is a useful marker for the eastern blocks. We confirm access and parking with you before the visit so there are no surprises on the day.
The tallest building in Canary Wharf and the easiest landmark to navigate by. We use it to orient ourselves when heading to jobs in the central estate and the surrounding high-rise blocks.
A central public square surrounded by offices and apartments. It is a useful reference point for jobs in the middle of the Canary Wharf estate, where vehicle access is restricted.
A dock area with residential and commercial buildings on both sides. We use it to work out which approach road to take when heading to jobs on the western edge of Canary Wharf.
Located near West India Quay, the museum is a handy marker for jobs in the older dockland streets. It helps us route around the one-way systems near Limehouse.
These are our most frequently served ZIP codes. Nearby areas may also qualify—call if you do not see yours.
Canary Wharf · Isle of Dogs · Poplar · Blackwall
Our team can help if your question is not answered here.
Call 02080885342 →Most residential lofts in Canary Wharf cost between £1,500 and £2,800 in 2026, with larger commercial or cavity wall jobs running from £3,000 to £4,500 or more. The final price depends on the type of foam, how much of the roof void is affected, and access. We quote upfront after an assessment, so there are no surprises.
Serenity Spray Foam Installers covers every part of Canary Wharf, from South Quay and Cabot Square to Poplar and Blackwall. We have been working in E14 since 2022 and handle residential, commercial and emergency removal. Call 02080885342 and we will confirm availability for your street straight away.
Yes, same day spray foam removal is available across Canary Wharf when a survey or valuation is booked at short notice. Call before midday and we can often have a technician at your property the same afternoon. We keep a van stocked with dry ice pellets and extraction gear for E14 postcodes.
We cover the whole of Canary Wharf and the surrounding Isle of Dogs area, including Poplar, Blackwall, Cubitt Town, Millwall and Limehouse. Canary Wharf is our core service area, so response times are short and same day slots are usually available. We also cover nearby boroughs across Greater London.
The best approach depends on your foam and your roof structure. For delicate timber, dry ice blasting is the safest method. For dense closed cell foam, mechanical cutting tools are faster. We assess every Canary Wharf job with a thermal imaging camera and use the method that removes the foam without damaging your property.
Free survey, fixed price, and photographs for your lender when we finish. Call 02080885342 or email us and we will book you in, often within 48 hours.
Tell us what you are seeing and where you are located. Our team will call to confirm the right appointment type and timing.