Tower Bridge
A useful orientation point for jobs in the north of the borough. It marks the boundary between SE1 and the riverside, and helps us pick the right crossing when routing crews between Southwark and Tower Hamlets.
Spray foam removal in Southwark is what we do every week, from Victorian terraces off Borough Market to converted lofts in Peckham and Dulwich. If a surveyor or mortgage lender has flagged the foam in your roof, we strip it out, clean the timbers and leave the loft ready for a fresh insulation spec. We cover Greater London, work to PAS 2035 and Building Regulations Part L, and give you a fixed price before we start.
Every Southwark job starts with an insulation assessment, because the right removal method depends on what is actually in your roof. Open cell foam in a Peckham loft comes out differently to closed cell foam bonded to a Rotherhithe warehouse ceiling. If you have been searching for spray foam removal near me Southwark and getting vague answers, we will tell you straight what is involved, what it costs and how long it takes before anyone picks up a tool.
Spray Foam Removal near meWe cover every Southwark postcode, from SE1 around Borough Market down to SE21 in Dulwich. Most calls are homeowners in Victorian terraces or loft conversions who need foam out before a sale completes. We survey, quote and book within days, not weeks.View details →
same day Spray Foam RemovalSame day spray foam removal in Southwark is available when a lender or buyer needs a fast turnaround. Call before midday and we can often have a crew at your property in SE15, SE16 or SE17 the same afternoon for a survey and, where access allows, to start removal.View details →
24/7 Spray Foam RemovalWater getting in through a foam-filled roof does not wait for office hours. Our 24/7 line covers Southwark for emergency call-outs where foam has failed, a roof is leaking or a ceiling is bowing. We make safe, document the damage and schedule full removal.View details →
Residential Spray Foam RemovalMost of our Southwark work is residential: terraces in Walworth, semis in Dulwich, flats in Elephant and Castle. We protect floors and stairwells with protective sheeting, keep dust contained with air scrubbers, and work room by room so you can stay in the property.View details →
Commercial Spray Foam RemovalSouthwark has a lot of converted commercial space around Borough, Canada Water and Rotherhithe where old spray foam sits above suspended ceilings. We work out of hours to avoid disrupting trading, and provide the waste transfer documentation your facilities team will need.View details →
loft spray foam removalLoft spray foam removal Southwark is our most requested job. Foam sprayed directly onto the underside of roof tiles or between rafters blocks the ventilation gap, and that is what surveyors flag. We remove it, clear the rafters and restore airflow before any new insulation goes in.View details →
roof spray foam removalWhere foam has been sprayed at roof level in Southwark, access is usually through the loft rather than from outside. We use thermal imaging to find the full extent, then remove foam from rafters, purlins and roof decking without damaging the tiles above or the plaster below.View details →
Attic spray foam removalAttic spray foam removal in Southwark often means working in tight, low-headroom spaces in older terraces. We use compact reciprocating saws and oscillating multi-tools to get into eaves and corners, and HEPA-filtered vacuums to capture dust as we go.View details →
spray foam insulation removalFull spray foam insulation removal Southwark, whether it is a single loft or a whole building. We remove open and closed cell foam, adhesive residue and contaminated insulation, then leave the structure clean enough for a surveyor to inspect and sign off.View details →
open cell spray foam removalOpen cell foam is softer and more common in older Southwark lofts, but it still traps moisture. We cut it back, remove adhesive residue from timbers, and check for hidden damp and rot underneath before declaring the loft clear.View details →
closed cell spray foam removalClosed cell foam is the one that causes mortgage rejection due to spray foam. It is rigid, bonded hard to rafters and often hides rot. We remove it with saws and dry ice blasting, working carefully so we do not take timber with it.View details →
mortgage lender spray foam removalIf your Southwark purchase has stalled because of foam, we produce the documentation lenders and surveyors ask for: photos of the foam before removal, the method used, and confirmation the roof void is clear and ventilated. That paperwork is often what unblocks a sale.View details →
insulation removal serviceOur insulation removal service in Southwark covers foam, old mineral wool, contaminated boards and anything else that has to come out before a re-spec. We dispose of everything through licensed waste routes and give you the paperwork.View details →
insulation assessmentBefore any removal, we assess what is in your Southwark loft and how far it has spread. Thermal imaging cameras show cold bridging and damp pockets the eye cannot see, so you get an accurate scope and price rather than a guess.View details →
dry ice blasting spray foam removalDry ice blasting is our method of choice where foam sits on fragile or historic timbers in Southwark conservation areas. Dry ice pellets lift residue without abrasion, leaving the timber intact and the surface ready for inspection.View details →
Cavity wall spray foam removalCavity wall spray foam removal in Southwark is common in 1930s semis around Dulwich and Camberwell where foam was injected years ago. We remove it through targeted openings, check for bridging damp, and make good the brickwork afterwards.View details →
sand blasting spray foam insulation removalFor stubborn foam and adhesive residue on brick or concrete in Southwark, sand blasting media strips the surface back to a clean substrate. We control dust with protective sheeting and air scrubbers so neighbouring properties are not affected.View details →
thermal spray foam removalThermal spray foam removal uses heat-controlled methods where foam has bonded to delicate surfaces. In Southwark lofts with old lath and plaster, this avoids the cracking that heavy-handed cutting can cause.View details →
environmentally friendly insulation removalWe keep Southwark jobs as clean as the method allows: HEPA filters on every vacuum, foam separated for licensed disposal, and dry ice blasting instead of chemical strippers wherever it works. Less mess, less waste, no shortcuts.View details →
Warehouse spray Foam removalSouthwark's warehouse conversions around Rotherhithe and Canada Water often have spray foam above ceilings and on roof soffits. We work at height with the right access equipment and schedule around your tenants and trading hours.View details →
A typical Southwark loft takes one to two days to strip, depending on how much closed cell foam is bonded to the rafters. We start with an insulation assessment using a thermal imaging camera, because foam that looks fin
Loading and unloading takes longer, and we cannot always park directly outside. On narrow streets near Borough Market we may need to carry equipment a short distance, which adds time to the setup.
How we help: We check parking restrictions and loading bay times before the job and book a bay where possible. For SE1 jobs we often send a smaller van with the core kit and bring the bulk removal equipment in once the bay is secured.
Foam sprayed between rafters in Southwark terraces blocks the airflow the roof was designed around. That traps moisture, and by the time foam is removed there is often damp or rot in the timbers underneath.
How we help: We use thermal imaging to map damp before we cut, then remove foam in sections so we can inspect each rafter as it is exposed. Where rot is found we document it and advise on timber treatment before any new insulation goes back in.
In conservation areas around Borough and Dulwich, scaffolding and external roof access can be restricted. That means almost all removal has to happen from inside the loft, in tight spaces.
How we help: We plan every job as an internal removal from the start, using compact tools and dry ice blasting rather than heavy equipment. Where external access is unavoidable we work with you on the permissions needed before we book the date.
A surveyor has flagged the foam in your loft
Your mortgage application has stalled
Damp patches or staining on upper ceilings
A musty smell in the loft or upstairs rooms
Condensation on roof timbers or felt
Southwark is easy to navigate once you know it, but the one-way systems and parking restrictions near the river catch people out. We use Tower Bridge and The Shard as our main orientation points when routing crews across the borough, and Borough Market as the marker for the SE1 jobs where parking needs booking in advance. For anything south of the river, Canada Water and Dulwich Picture Gallery tell us which side of the borough we are working and which route to take.
A useful orientation point for jobs in the north of the borough. It marks the boundary between SE1 and the riverside, and helps us pick the right crossing when routing crews between Southwark and Tower Hamlets.
Visible from most of Southwark, so it is a reliable way to confirm which side of the borough a crew is on. Jobs around London Bridge and Borough are routed using it as the reference point.
A marker for the SE1 jobs where parking is tightest. We use it to plan loading bay bookings and to time arrivals outside the busiest market hours.
Sits on the riverside near Bankside, which helps us separate the riverside jobs from the residential streets further south. Useful for routing around the South Bank traffic.
These are our most frequently served ZIP codes. Nearby areas may also qualify—call if you do not see yours.
Bermondsey · Peckham · Dulwich · Elephant and Castle
Our team can help if your question is not answered here.
Call 02080885342 →Most Southwark loft removals cost between £2,200 and £3,800 in 2026, with straightforward open cell jobs starting around £1,800 and large closed cell jobs with rot reaching £5,500 or more. Cavity wall foam is priced separately by the metre. We give a fixed price after the survey, so you know the total before we start.
We do. Serenity Spray Foam Installers has covered Southwark since 2022, working across SE1, SE15, SE16, SE17, SE21 and SE22. We handle loft, attic, roof and cavity wall foam removal for homeowners, landlords and commercial properties, and we provide the documentation lenders and surveyors ask for. Call 02080885342 to book a survey.
Same day spray foam removal in Southwark is often possible if you call before midday and the property is accessible. We can usually get a crew out the same afternoon for a survey and, where access allows, to start removal. For urgent cases tied to a mortgage deadline, tell us the date you need it done by.
Yes, we cover the whole borough, from Borough and Bermondsey in the north through Peckham, Camberwell and Walworth to Dulwich in the south. We also work across the neighbouring boroughs, including Lambeth, Tower Hamlets and Westminster. Wherever you are in Southwark, we can book a survey within a few days.
The best spray foam removal in Southwark is the one that satisfies your lender and leaves the roof void properly ventilated. That means full removal rather than surface scraping, a thermal imaging check for hidden damp, and written documentation of the work. We have done this across Southwark since 2022 and can show you exactly what the job involves before you commit.
Free survey, fixed price, and photographs for your lender when we finish. Call 02080885342 or email us and we will book you in, often within 48 hours.
Tell us what you are seeing and where you are located. Our team will call to confirm the right appointment type and timing.