Kingston Bridge
Kingston Bridge marks the crossing between Kingston town centre and the riverside streets. We use it to orient jobs on the east side of the borough and to plan routes around the one-way system.
Your local Kingston upon Thames Spray foam removal team
Spray foam removal in Kingston upon Thames done right
Spray foam removal in Kingston upon Thames is what our team does every week, from Victorian terraces off Market Place to 1930s semis in Tolworth. If a surveyor or mortgage lender has flagged spray foam in your loft, we cut it out, clean the timbers and leave the roof space ready for a proper insulation upgrade. We cover Kingston, Surbiton, New Malden and Chessington with same day call-outs.
4Years serving Kingston upon Thames
24/7Emergency call-out cover
4.9 starAverage customer rating
Services available in Kingston upon Thames
Spray foam removal services across Kingston upon Thames
Every job we quote in Kingston upon Thames starts with the same question: is the foam open cell or closed cell, and how far has it spread? Open cell foam in a loft is usually straightforward to cut out. Closed cell polyurethane that has been sprayed directly onto roof felt is a different animal, and it often needs dry ice blasting or sand blasting media to remove without tearing the membrane. If you have been searching for spray foam removal near me Kingston upon Thames, we cover the whole borough and can usually survey within 48 hours.
Spray Foam Removal near meIf you are searching for spray foam removal near me in Kingston upon Thames, we cover every KT postcode from KT1 through to KT9. Our vans are based in south-west London, so we can reach Surbiton, Tolworth or Berrylands quickly. We handle lofts, cavity walls and roof voids in period terraces and modern semis alike. Call us and we will book a survey at a time that suits you.View details →
same day Spray Foam RemovalSame day spray foam removal in Kingston upon Thames is available for urgent cases, usually where a lender has set a tight deadline before exchange. We keep one van on standby for KT postcodes. If you call before 10am, we can often have a technician at your property in Kingston, New Malden or Chessington that afternoon. The work itself usually takes four to six hours for a standard loft.View details →
24/7 Spray Foam RemovalOur 24/7 spray foam removal line covers Kingston upon Thames for emergencies, including water ingress where foam has trapped moisture against rafters. If you have discovered active damp or a leaking roof and the foam is making it worse, call us any hour. We will talk you through immediate steps over the phone and get a technician out as soon as possible, day or night.View details →
Residential Spray Foam RemovalMost of our Kingston upon Thames work is residential. We remove foam from lofts, attic spaces, cavity walls and roof slopes in houses across Surbiton, Old Malden and Berrylands. We use protective sheeting and negative air machines to keep dust out of your living space. Furniture stays where it is, and we vacuum every surface before we leave. You get a clean, breathable roof space ready for building control.View details →
Commercial Spray Foam RemovalCommercial spray foam removal in Kingston upon Thames covers warehouses, offices and retail units, particularly around the Tolworth and Chessington industrial corridors. We work out of hours to avoid disrupting your operation. Larger spaces need industrial vacuum units and air scrubbers, and we can phase the removal across several nights if needed. You get a full waste transfer note for your compliance records.View details →
loft spray foam removalLoft spray foam removal in Kingston upon Thames is our most common job. The typical scenario is a semi-detached house in New Malden or Tolworth where foam was injected between the rafters years ago. We cut it back to the timber, check for hidden damp and rot underneath, and remove any adhesive residue. The loft is then ready for a breathable insulation system that will not block ventilation.View details →
roof spray foam removalRoof spray foam removal in Kingston upon Thames often means working at height on properties near Kingston Bridge or in the conservation areas around Hampton Court Palace. Foam sprayed directly onto the underside of roof tiles or felt traps condensation and can rot the battens. We remove it carefully with oscillating multi-tools and, where needed, dry ice blasting, then inspect the roof structure before we sign the job off.View details →
Attic spray foam removalAttic spray foam removal in Kingston upon Thames covers older properties where the attic has been converted or partially boarded. Foam around chimney breasts and party walls is common in Victorian terraces near Market Place. We remove it without disturbing the chimney structure, using hand tools and a thermal imaging camera to check for gaps. The attic is left clean and ready for inspection.View details →
spray foam insulation removalSpray foam insulation removal in Kingston upon Thames is usually driven by a mortgage lender or a building surveyor's report. We remove open cell and closed cell insulation from lofts, rafters and cavity walls. Every job includes a full assessment of what is underneath, because foam hides damp, rot and failed felt. You get a written summary of what we found and what we removed.View details →
open cell spray foam removalOpen cell spray foam removal in Kingston upon Thames is the simpler of the two foam types. It is softer, more breathable and usually comes away with a reciprocating saw and a sharp blade. We still use protective sheeting and a HEPA vacuum because the dust is unpleasant. Most open cell lofts in Surbiton and Chessington take three to four hours to clear completely.View details →
closed cell spray foam removalClosed cell spray foam removal in Kingston upon Thames is harder work. This foam sets rock hard and bonds to timber and felt. We use dry ice blasting to freeze and crack the foam away from delicate surfaces, then sand blasting media for the stubborn residue. It takes longer and costs more, but it is the only way to remove closed cell foam without damaging the roof structure.View details →
mortgage lender spray foam removalMortgage lender spray foam removal in Kingston upon Thames is a specialist service for homeowners whose sale or remortgage has stalled. Lenders including several high street banks will not lend against a property with spray foam in the roof. We provide the documentation they need: before and after photographs, a waste transfer note and a written confirmation that the foam has been fully removed. Most Kingston cases complete within a week.View details →
insulation removal serviceOur insulation removal service in Kingston upon Thames covers spray foam, old mineral wool and contaminated insulation that has been sitting under a leaking roof. We remove it all, bag it and dispose of it correctly. If your loft has a mix of materials, we will separate them on site. You get a clear, empty roof space and a proper waste record for your files.View details →
insulation assessmentAn insulation assessment in Kingston upon Thames tells you exactly what is in your roof space before you commit to removal. We use a thermal imaging camera and a moisture meter to check for hidden damp, condensation and gaps. You get a written report with photographs. It is the right first step if a surveyor has raised concerns but you are not sure how bad the foam really is.View details →
dry ice blasting spray foam removalDry ice blasting spray foam removal in Kingston upon Thames is our go-to method for delicate roof timbers and felt. Dry ice pellets freeze the foam, which then cracks away from the surface without abrasion. There is no secondary media to clean up, and the process is safe around wiring and pipework. It is slower than cutting, but it protects the structure underneath.View details →
Cavity wall spray foam removalCavity wall spray foam removal in Kingston upon Thames is common in 1930s semis across Tolworth and Old Malden. Foam injected into a cavity can bridge the gap and cause damp to track across the wall. We remove it using a combination of cutting tools and industrial vacuum equipment, then inspect the cavity for any damage. The wall is left ready for a proper retrofit insulation system.View details →
sand blasting spray foam insulation removalSand blasting spray foam insulation removal in Kingston upon Thames is used where foam has bonded hard to brickwork or blockwork. The sand blasting media strips the residue back to a clean surface without damaging the masonry. We use it mainly in commercial units and older industrial buildings around Chessington. All media is recovered and disposed of correctly.View details →
thermal spray foam removalThermal spray foam removal in Kingston upon Thames uses heat to soften the bond between foam and timber before we cut it away. It is useful in tight loft spaces where a saw cannot reach. We use it alongside thermal imaging cameras to make sure no foam is missed behind rafters or under boarding. The heat is controlled so there is no risk to the roof structure.View details →
environmentally friendly insulation removalEnvironmentally friendly insulation removal in Kingston upon Thames means we recycle where possible and dispose of everything else through licensed waste carriers. Foam is bagged in disposal bags and kept separate from other waste. We use HEPA filters on all vacuums to stop fibres escaping. If you want the job done without cutting corners on waste, this is the service for you.View details →
Warehouse spray Foam removalWarehouse spray foam removal in Kingston upon Thames covers large industrial units, particularly around the Tolworth and Chessington business areas. These roofs often have thick closed cell foam that needs mechanical removal. We work in phases, often at night, to keep your operation running. You get a full waste transfer note and a clean roof deck ready for re-insulation.View details →
More than a service list
How we execute spray foam removal in Kingston upon Thames
Spray foam removal in Kingston upon Thames Greater London follows a set routine. We start with a survey using a thermal imaging camera to map the foam and check for hidden damp. On the day, we lay protective sheeting, se
Conservation areas restrict roof access and materials
In areas like Kingston town centre and near Hampton Court Palace, you cannot use heavy machinery or scaffolding without permission. This slows the job and means we rely more on hand tools and dry ice blasting.
How we help: We survey first and agree the method with you. Where scaffolding is not allowed, we use ladders and roof ladders with fall protection. All waste leaves through the house in bags, not via a chute.
Period properties with fragile lath and plaster ceilings
Victorian and Edwardian terraces around Surbiton and Berrylands often have lath and plaster ceilings that crack if you walk heavily in the loft. Foam removal can dislodge them if not done carefully.
How we help: We lay boards across the joists to spread weight and use low-vibration tools. Where foam is bonded to lath, we switch to dry ice blasting, which puts no pressure on the ceiling below.
Limited parking on narrow residential streets
Streets near Kingston station and in Old Malden are tight, and our vans need to be close for equipment and waste. Without parking, the job takes longer and costs more.
How we help: We apply for a suspension or dispensation from Kingston Council where needed, or park on a nearby side street and run a hose. We build this into the quote so there are no surprises on the day.
Early warning signs
Have us take a look →
Signs you need spray foam removal in Kingston upon Thames
01
Mortgage lender refuses your application
02
Damp patches on ceilings or walls
03
Musty smell in the loft or attic
04
Condensation on roof felt or rafters
05
Surveyor flags foam in a building survey
We know the route
Landmarks and points of interest in Kingston upon Thames
We use local landmarks to navigate the borough and plan our routes. Kingston Bridge is a useful marker for the riverside streets, while Hampton Court Palace helps us orient jobs to the south-west. Richmond Park is a reference point for the large detached houses on the Kingston side. Surbiton Station and Market Place Kingston are common drop-off points for our surveyors. Chessington World of Adventures is a landmark we use for the southern KT9 postcodes. These are orientation points only, not places we work at.
Hampton Court Palace
Hampton Court Palace is a useful reference for the south-west corner of the borough. Jobs in the streets around it often have conservation area restrictions, so we plan access carefully.
Richmond Park
Richmond Park forms the northern boundary of the borough. We use it to orient larger detached properties on the Kingston side, where lofts are often bigger and foam coverage is more extensive.
Surbiton Station
Surbiton Station is a key transport hub and a useful meeting point for surveyors. Many of our Surbiton jobs are within walking distance of the station, and parking is easier on the side streets nearby.
Primary Kingston upon Thames response zone
Kingston upon Thames service coverage
Is your ZIP on the route?
These are our most frequently served ZIP codes. Nearby areas may also qualify—call if you do not see yours.
Popular neighborhoods
Check my address →
Surbiton · New Malden · Chessington · Tolworth
Outside Kingston upon Thames?
Nearby cities and service coverage
01WestminsterWestminster is about 12 miles north-east of Kingston upon Thames. We cover it for commercial spray foam removal and for homeowners who have been referred to us by London surveyors.↗02CamdenCamden is around 14 miles from Kingston upon Thames. We work there mainly on period properties and commercial units where spray foam has been flagged in a survey.↗03IslingtonIslington is roughly 13 miles from Kingston upon Thames. We cover it for loft and cavity wall foam removal, often for landlords with multiple properties.↗04HackneyHackney is about 15 miles from Kingston upon Thames. Most of our work there is residential, particularly in Victorian terraces with foam in the roof space.↗
Kingston upon Thames Spray foam removal FAQ
FAQs about spray foam removal in Kingston upon Thames
Our team can help if your question is not answered here.
Call 02080885342 →Most jobs in Kingston upon Thames cost between 1,800 and 4,500 in 2026. Open cell foam in a standard loft is at the lower end. Closed cell foam or cavity wall foam costs more because it takes longer and needs specialist equipment. We provide a fixed quote after a free survey.
Serenity Spray Foam Installers covers every KT postcode from KT1 to KT9. We are based in south-west London and have been removing spray foam in Kingston upon Thames since 2022. Call 02080885342 to book a survey or ask for a same day call-out.
Yes, same day spray foam removal is available in Kingston upon Thames if you call before 10am. We keep one van on standby for urgent jobs, usually where a lender has set a deadline. The work itself takes four to six hours for a standard loft.
We cover the whole borough, including Surbiton, New Malden, Chessington, Tolworth, Berrylands and Old Malden. Our vans are in the area daily, and we can reach most KT postcodes within 30 minutes. We also cover nearby areas like Richmond upon Thames and Merton.
The best spray foam removal in Kingston upon Thames is the one that removes all the foam, checks for hidden damp and gives you the paperwork your lender needs. We use thermal imaging cameras, dry ice blasting and HEPA-filtered vacuums. Our customers rate us 4.9 out of 5.
Kingston upon Thames team is ready
Get your London loft cleared before the survey
Free survey, fixed price, and photographs for your lender when we finish. Call 02080885342 or email us and we will book you in, often within 48 hours.
Request Kingston upon Thames service
Send the details. We'll handle the next step.
Tell us what you are seeing and where you are located. Our team will call to confirm the right appointment type and timing.
Kingston upon Thames service hubLondon, Greater London02080885342Open 24 hours · 7 days a week